Showing posts with label Do It Yourself. Show all posts
Showing posts with label Do It Yourself. Show all posts

Monday, March 23, 2009

How to Make a Non-Toxic Cleaning Kit




Most modern synthetic cleaning products are based on age-old formulas using natural ingredients that were passed down through the generations because the chemistry was right. Going back to the original naturally derived ingredients is a way to make cleaning products that work, don’t pollute and save you money. Most are found in your kitchen cupboards. Mix and match with well-chosen and environmentally friendly green cleaning products found in health food stores, and you can easily and simply transform your home into a non-toxic and healthy haven.

Non-toxic cleaning can give you a deep feeling of gratification in knowing that your family’s health is protected, and that your home is a place for your bodies to rest and recuperate rather than promote harm.

Making your own nontoxic cleaning kit will take you no time at all with these simple, straightforward directions, and with this kit you will be supplied with enough cleaning product for months of cleaning.

As an added bonus, ounce for ounce homemade cleaning formulas cost about one-tenth the price of their commercial counterpart—and that includes costly, but worthwhile essential oils, and concentrated, all-purpose detergents for homemade recipes.

SUPPLIES
Baking soda
Washing soda
White distilled vinegar
A good liquid soap or detergent
Tea tree oil
6 clean spray bottles
2 glass jars

Read more about these 5 basic cleaning ingredients, and a vinegar update.

CREAMY SOFT SCRUBBER
Simply pour about 1/2 cup of baking soda into a bowl, and add enough liquid detergent to make a texture like frosting. Scoop the mixture onto a sponge, and wash the surface. This is the perfect recipe for cleaning the bathtub because it rinses easily and doesn’t leave grit.

Note: Add 1 teaspoon of vegetable glycerin to the mixture and store in a sealed glass jar, to keep the product moist. Otherwise just make as much as you need at a time.

WINDOW CLEANER
1/4-1/2 teaspoon liquid detergent
3 tablespoons vinegar
2 cups water
Spray bottle

Put all the ingredients into a spray bottle, shake it up a bit, and use as you would a commercial brand. The soap in this recipe is important. It cuts the wax residue from the commercial brands you might have used in the past.

OVEN CLEANER
1 cup or more baking soda
Water
A squirt or two of liquid detergent

Sprinkle water generously over the bottom of the oven, then cover the grime with enough baking soda that the surface is totally white. Sprinkle some more water over the top. Let the mixture set overnight. You can easily wipe up the grease the next morning because the grime will have loosened. When you have cleaned up the worst of the mess, dab a bit of liquid detergent or soap on a sponge, and wash the remaining residue from the oven. If this recipe doesn’t work for you it is probably because you didn’t use enough baking soda and/or water.

ALL-PURPOSE SPRAY CLEANER
1/2 teaspoon washing soda
A dab of liquid soap
2 cups hot tap water

Combine the ingredients in a spray bottle and shake until the washing soda has dissolved. Apply and wipe off with a sponge or rag.

FURNITURE POLISH
1/2 teaspoon oil, such as olive (or jojoba, a liquid wax)
1/4 cup vinegar or fresh lemon juice
Mix the ingredients in a glass jar. Dab a soft rag into the solution and wipe onto wood surfaces. Cover the glass jar and store indefinitely.

VINEGAR DEODORIZER
Keep a clean spray bottle filled with straight 5 percent vinegar in your kitchen near your cutting board and in your bathroom and use them for cleaning. I often spray the vinegar on our cutting board before going to bed at night, and don’t even rinse but let it set overnight. The smell of vinegar dissipates within a few hours. Straight vinegar is also great for cleaning the toilet rim. Just spray it on and wipe off.

MOLD KILLERS

Tea Tree Treasure
Nothing natural works for mold and mildew as well as this spray. I’ve used it successfully on a moldy ceiling from a leaking roof, on a musty bureau, a musty rug, and a moldy shower curtain. Tea tree oil is expensive, but a little goes a very long way. Note that the smell of tea tree oil is very strong, but it will dissipate in a few days.

2 teaspoons tea tree oil
2 cups water

Combine in a spray bottle, shake to blend, and spray on problem areas. Do not rinse. Makes two cups.

Vinegar Spray
Straight vinegar reportedly kills 82 percent of mold. Pour some white distilled vinegar straight into a spray bottle, spray on the moldy area, and let set without rinsing if you can put up with the smell. It will dissipate in a few hours.

Source: Care 2 Make A Difference

Saturday, March 14, 2009

Replace Car Wiper Blades




Save money by doing this yourself.

Learn how and when to replace the wiper blades on your car for maximum performance and safety.

Watch This Video

Source: About.com:Cars

Check Tire Air Pressure




You can save money by doing things yourself.

Air pressure is just one important thing to check periodically in your car's tire maintenance. Learn how to maintain and check your car tires for optimal performance, longevity, and safety.

Watch This Video

Source: About.com:Cars

Remove Corrosion from a Car Battery




An essential way to keep your car running safely and efficiently is to keep corrosion corrosion off of your battery. Learn how to clean and maintain your car battery posts the traditional way, or try this.

Watch This Video

Source: About.com:Cars

Easy Car Paint Scratch Removal Trick




What's more unappealing than finding a nasty scratch in your car's paint job? Try this easy trick used by the professionals that will fill in the paint scratch without making a mess of your car or costing you a fortune.

Watch This Video

Source: About.com:Cars

How to Change a Flat Tire




You don't have to panic the next time you get a flat tire. Follow these simple steps and you'll be able to replace your flat tire with your spare quickly and easily. You can save money by doing it yourself and not having to pay someone to do it for you.

Watch This Video

Source: About.com:Cars

How to Wax a Car at Home




Sure you have better things to do on a Saturday, but there are many benefits to waxing your car every so often. Save a few bucks now, invest a little elbow grease, and you'll be reaping the rewards of a properly waxed car for years to come.

Watch this Video


Source: About.com:Cars

Friday, March 13, 2009

Shampoo Your Own Carpets





Save money by shampooing your own carpet instead of calling a professional to come and do it. A couple years ago, I purchased my own carpet cleaner with rotating brushes. I love it! For under $200 I have a cleaner to clean my own carpets and usually do them around every 3-4 months.

***************

Here is an article from EHow that I found on making your own carpet cleaning solution. I'm going to try this myself and save even more money on the expensive cleaners.

Keeping carpets clean can be a never-ending task. Dirt and odors are soaked up daily by the constant activity of the household. Purchasing cleaning agents for your steam cleaner can be harmful for your family and pets, as well as the environment. By making your own carpet cleaning solution, you'll be going green AND saving some green as well.

STEP 1
BASIC RECIPE:
Mix together 1/2 cup white vinegar and one gallon of water. Add to cleaning solution on your carpet's steam cleaner.

Clean carpets as directed by steam cleaner's manufacturer.

STEP 2
SPOT REMOVER:
Mix together enough baking soda and vinegar to form a paste. Rub into spot on the carpet, using an old toothbrush or scrub brush if needed. Allow the paste to dry. Vacuum up the dried paste and the spot should be gone.

STEP 3
CARPET FOAM CLEANER:
Mix together 1/4 cup vegetable oil-based liquid soap and ~3 Tablespoons of water. Whisk with a wire whisk or egg mixer until it foams. Rub foam onto problem areas of carpet. Rinse with water, blot with towels, and allow to dry thoroughly.

STEP 4
GREASE REMOVER:
Soak up as much grease as possible. Sprinkle either baking soda or corn starch onto grease. Leave on overnight. Vacuum carpet.


Things You’ll Need:

* steam cleaner
* water
* vinegar
* other household materials, depending on the recipe you choose

Source: EHow

Keep Filters Changed




Changing the air filters in your home air conditioning units is the least expensive thing you can do to maintain your cooling system. Dirt and air pollutants can damage your health and damage the equipment requiring expensive repair or replacement of the system. Follow these simple steps to change your air conditioner filter:

Step1
Locate your furnace and the filter compartment. This compartment is normally covered by a strip of metal that slides in and out of place.
Step2
Determine the size of the air filter that needs to be replaced. The sizes are noted on the side and usually appear as 16x24 inches and other similar sizes.
Step3
Purchase a replacement filter in the size required for your system. There are a variety of filters to choose ranging from the inexpensive standard spun glass filters to pricier synthetic polyester fibers.
Step4
Consider high efficiency filters if you live in warmer, dustier climates as they do more than just capture dust particles. The high efficiency filters can trap tiny particles of dust, pollen, mold and other irritants.
Step5
Look at hepa filters and filters coated with chemicals to kill bacteria if allergies and other irritants are a concern for your family, .
Step6
Use a black permanent marker when you change the filter. When you slide up the metal guard, note the direction of the air flow marked on the side of the old filter and draw arrows in the same direction on the metal guard. This way you will have no question which direction to insert the new filter.
Step7
Replace high efficiency filters at least 4 times per year. Read the manufacturer's label as most recommend changing your air filter on a monthly basis. (High efficiency filters do have a longer life expectancy than the less expensive spun-fiber filters.
Step8
Discard the old filter.

Source: EHow

Hot Water Heater Not Heating?










A few weeks ago, our hot water heater quit producing hot water. Great! Here we are with a house full of people, no extra money to pay someone to come and fix it and it's also on a Saturday! Isn't that when things usually happen?

I have learned that "Google" is my best friend. I "Google" everything! After doing a search on the internet, it was determined that our hot water heater probably needed a new thermostat. I found how to take the front cover off the hot water heater and replace the thermostat.


*VERY IMPORTANT-READ THIS BEFORE YOU DO ANYTHING!

FIRST TURN OFF THE ELECTRICITY AT YOUR ELECTRICAL BOX OR FUSE BOX!

Do this BEFORE you do anything!

I found the breaker to the electric hot water heater and flipped it off. There are two metal covers on the front of the hot water heater. I removed those with a screwdriver. I had been familiar with them before on different occasions, from turning the water temperature up and down. If your water is too hot or too cold, you can take those covers off and there is a little dial that you need to get a small screwdriver or a kitchen butter knife and turn it. Look at the numbers on the dial to see which way to turn it to make it hotter and which way to turn it to make it cooler. In the winter time, I like to turn our water up on HOT so that I can soak in a tub of water as hot as I can stand it.

Since we did not have money in our budget to pay someone to come to the house and fix our problem, my husband and I headed to Home Depot. This is his favorite store. We found exactly what we needed. We purchased the whole kit 'n kaboodle. We got the package that came with two heating elements and two thermostats and was only $35. They have other packages that you don't have to purchase everything. It seems like one thermostat would have cost around $17, so we decided it was cheaper to purchase it all in and put the rest up for later. If we would have called a certified person to come and fix it they would have charged $60 for the service call and that isn't including the cost for parts.

My husband replaced both the thermostats on the hot water heater. We did not replace the heating elements at this time. We decided to put them to the side in case we have trouble with them later on.

The thermostats were very easy to replace. He had to loosen up screws on the thermostats on the hot water heater and remove the old thermostat. Then putting the wiring under the new one, lining it up in the right places and tighten the screws. It was very simple.

When you are finished, set your temperature at a level you are comfortable with for your hot water before putting the metal covers back on.

*If you have small children, you will NOT want to turn it up all the way. If the hot water is too hot, it could very easily scald them. Now you are ready to put the metal cover back on and tighten the screws on them. Now you can turn the electricity back on to the electrical box. That's it.. your all done!

When I "Google"... I type in the search box what my problem is and things always come up. In this case, I probably Googled, "Hot water heater not heating up".

Make Google your BEST friend. Other than your spouse, of course! LOL